The cooking zones turn off automatically.

You can use the cooking zones again as usual when the fault message has gone out. FE flashes in the timer display alternatingly with 44.

The cooking zone turns off automatically.

The power level that is set will be reduced.

Any booster function in operation will be turned off.To prevent the induction coils and cooling elements from overheating, the overheating protection mechanism works on the affected cooking zone or on the entire cooktop in the following ways: 1 minute.Īll the induction coils and the cooling elements for the electronics are equipped with an overheating protection mechanism. Interrupt the power supply to the hob for approx. There is a fault in the electronic module. Make sure it has not been blocked by something like a fork. The overheating protection mechanism has been activated. If the problem persists after power has been restored, please contact Miele Service. Disconnect the power supply to the hob for approx. 1-0) is flashing alternately with a 3-digit number in the timer display.

The hob must be connected to the mains according to the wiring diagram.ġ and a number (e.g. Disconnect the hob from the mains electricity supply. Touch the  and  sensor controls at the same time until dE flashes alternately with OFF in the timer display.Įrr alternating with 30 flashes in the timer display and a buzzer sounds. Clean off any dirt and/or remove the objectĪfter the hob has been switched on dE appears in the timer display for a few seconds. by finger contact, food boiling over or an object. One or more of the sensor controls are covered, e.g. When the element is switched back on, C appears above the On/Off sensor control. Deactivate the system lock or safety lock.

The system lock or safety lock is activated. Error CodesĪfter the hob has been switched on, or after touching a sensor, LOC appears in the timer display for a few seconds. The following guide may help you to find the reason for a malfunction or a fault, and to correct it. Time and money will be saved because a service call will not be needed. The service technician had never seen the induction model before, spent a long time on the phone and then decided they will replace all the boards in the stove! I said no way - talked to my salesman, got a replacement stove and have never had a problem since.Many malfunctions and faults that can occur in daily operation can be easily remedied. The third option is to buy new control panels which could run me $1000 to $2000!!! I can't help you specifically, but I really wonder how they expect you to do that yourself? Is it no longer under warranty? Shortly after (less than 2 weeks) getting my Kenmore induction stove it started throwing fault codes (can't remember the number). how do you do this?) 2) check the connection terminal allocation (again.how do you do this?) It goes on to say that the 'secondary voltage of transformer-rectifier may have been too high (primary voltage greater than 300 volts) Can anyone explain what this means and how I might check out the above remedies. The technical help forwarded me an e-mail which suggested the following remedies: 1) check the incoming voltage ( Card Game Dammit Rules. Miele induction stovetop error FE31? What does error code FE 55 mean on my Miele induction cooktop? Miele Cooktops.ĭear experts: My Miele induction cooktop stopped working after a power outage (possibly a power surge) and gave the above fault code. I have just turned on a new Miele KM 6350 Induction Hob for the first time and it has come up with a flashing fault code FE 31. This Hob can be connected 3 phase or Single phase and as we are on single phase it has to have 2 links.

My one month old Miele KM6322 Induction plate stopped on Christmas day with the flashing error code FE 31.

Miele induction cooktop error fe 31